XADO gel Revitalizant for Cylinders

Price: $6.95       Price in reward points: 180

* Package:


XADO Gel-Revitalizant for Cylinder is designed for restoring repair and wear protection of the gasoline and diesel engine cylinder-piston group without disassembling.

The gel forms a new cermet coating on friction surfaces (the parts grow in volume and restore its original geometry).

After XADO revitalization the cylinder geometry restores, the inner diameter reduces, ellipse deformation of cylinders disappears preventing expensive overhaul. As a result a renovated unit by its running quality will exceed the performance level and will serve you from 2 up to 4 times longer.

The following results were received:

  • Increases compression;
  • Removes holes and scratches up to 0,0003 inch;
  • Protects cylinders from wear-out during “cold” start;
  • Reduces noise and vibration level;
  • Increases engine power;
  • Reduces fuel consumption;
  • Allows to process one or couple cylinders.

Technical Info

Basic Characteristics of the cermet coating:

  • Microhardness – 750 kg/mm2;
  • High corrosion resistance;
  • Roughness Ra up to 0,06 mkm.


Step 1: Warm up the engine (the engine should be warm, but not hot).
Step 2: Remove the spark-plug from the cylinder and disconnect the central wire of ignition distributor and igniter.
Step 3: For two-stroke engines fix the piston in the upper “dead” spot (in order to avoid getting the gel into the inlet and outlet windows).
Step 4: Squeeze out the tube content into the cylinder.
Note! Squeeze the content into the cylinder wall and not on the piston!!!
Step 5: Perform 15-20 piston strokes (by hand crank, towing, turning of a driving wheel etc.).
Step 6: Screw in the spark-plug and start the starter 3-4 times for 3-4 sec with the time break of 15-20 sec.
Step 7: For two-stroke engines the content of one more tube should be dissolved in 5 – 10 mi of motor oil and added into the fuel tank.
Step 8: Connect the central transmission, igniter; start the engine and operate at idle run for 15 min.
Step 9: Operate in a normal mode.


1 cylinder – 1 tube  


  • Use medical syringe with a plastic tube in hard-to-reach places. In this case the gel should be dissolved in 5 – 10 ml of motor oil. In order to avoid hydroblow the total volume of the fluid added into cylinder must not exceed 20 ml!
  • At diagnostics always check the adjustment and accuracy of the valve mechanism!


During the engine operation cylinder piston group in area of upper “blind” spot, the details of Variable Valve Event and Lift (VVEL), slider bearer of bent and countershaft.

Revitalizant contains constructional material which takes up the wear of details. Due to revitalization on the surface of friction pair a new multifunction gradient covering is formed with the number of necessary character rating and strenuous conditions. The details of the engine increase in volume by returning everything that was worn in the process of exploitation. This is an effect of repairmen. Obtained cover has unique properties: more solid, corrosionproof, low gritness. After revitalization details of engine reliably will serve up to 2-4 times longer. This is an effect of protection from wearing-out.

Due to revitalization of an engine significantly increases and aligns compression in cylinder, reduces fuel consumption, increases adhesion and coasting of car, restores of oil pumps, turbo sites, axles and linings, cylinder bearing surfaces, removes ovality. An engine will work quietly and without any vibration. Due to revitalization it can be kept in a perfect condition.


  • Restores and protects from wearing-out the friction parts of cylinder-piston group, crank type, connecting rod and gas-distributing mechanisms.
  • Reduces fuel consumption up to 30% during idle run.
  • Increases up to nominal oil pressure in system.
  • Smoothes and increases the compression in cylinders.
  • Increases engine power and improves its acceleration capability.
  • Decreases the level of noise and vibration up to 10 times.
  • Decreases noise and vibration level.
  • Increases performance of units up to 2 or 3 times.
  • Protects engine from negative effects after “cold start”.
  • Improves the work of engine after 51-62 miles.
  • Allows using engine during the emergency leak of oil up to 186 miles.


9 ml tube in blister
Buy XADO gel Revitalizant for Cylinder for petrol and diesel engine (9 ml) at XADO online store. You can see lowest price on XADO gel Revitalizant for Cylinder for petrol engine (9 ml). This product’s being sale online. Buy XADO tube now, buy XADO online it is safe & fast.

blister9 ml tube in blister
tube9 ml tube
Reviews (0)
Write a review

* Your Name:

* Your Review:

* Enter the code in the box below:

* Rating:

Bad Good