XADO Revitalizant EX120 for Diesel Engines Reinforced + 20%

Price: $21.45
$21.95       Price in reward points: 290

* Package:


New XADO Revitalizant EX120 for Diesel Engines is designed to protect from wear and to provide restoring repair of diesel engines, including high-powered and turbo- supercharged.
Due to its by 20% greater* active agent’s concentration, it offers strong restoration potential to the worn out surfaces and wear protection.
The gel forms a new cermet coating on friction surfaces (the parts grow in volume and restore its original geometry).
As a result a renovated unit by its running quality will exceed the performance level and will serve you from 2 up to 4 times longer.

EX120 starts repairing scratched and worn metal as soon as it is added to the engine oil. Revitalizant acts as a catalyst for rebuilding and repairing metal in areas of excessive thermal energy. It activates the absorption process of carbon through the surface layer which results in the formation of metal carbides. Revitalizant rebuilds metal at a molecular level, atom-by-atom, reversing wear and restoring engine geometry. A new durable protective coating is formed with the help of carbides and metal particles. Because it has a self-regulating maximum thickness it does not cake. The appearance of a Revitalized surface is smooth and glassy. Its physical structure however is a metal strengthened by metal carbides and carbon. The treated surface is transformed into a diamond-like film. The result of Revitalization is an extra hard metal-ceramic surface layer on a soft and flexible base – an almost perfect strengthening technique that guarantees an increased life.

The following results were received:

  • Increasing of the compression and its alignment of the cylinder from 19 up to 21 atm;
  • Heightening of engine power up to 2,7% (2,3 kW);
  • Reduction of fuel consumption up to 5,3%;
  • Reduction of emission control (CO2 – up to 5%, CO – up to 15%, HC – 8%).

Technical Info

Basic Characteristics of the cermet coating:

  • microhardness – 750 kg/mm2;
  • high corrosion resistance;
  • gritness Ra up to 0,06 mkm.

Application instructions

Treatment of the engine with the oil system 3-10 liters.
Step 1: Squeeze out the contents of one syringe into engine oil filler. Engine has to be warmed up to the working temperature. Start the engine and let it idle run for 5-10 minutes.
Step 2: Repeat the procedure which described in Step 1 after 100-250 km (62-155 mi).
Step 3: Repeat for the second time the procedure which described in Step 1 after 100-250 km (62-155 mi).


Oil system volume, L 3-10 11-20 21-30
Number of syringes (8 ml), pcs 3 6 9
Treatment scheme 1+1+1 2+2+2 3+3+3
Number of syringes for new engines 2 4 6


  • Do not change oil until the end of the processing!
  • Revitalization is considered to be completed after the mileage not less than 1500 km (932 mi).
  • Processing can be done at idle run (4 hours are equivalent to 200 km (124 mi);
  • New engines with the mileage 20 000 km (12, 427 mi) should be processed in one step – 2 syringes at one time.
  • An engine after a major repair should be processed in 3 stages regular procedure.
  • The protective cermet coating will be formed on any operative mechanism; but if the mechanism (engine) is in a critical state (wear-out for 100%) worn-out parts must be replaced.


During the engine operation cylinder piston group in area of upper “blind” spot, the details of Variable Valve Event and Lift (VVEL), slider bearer of bent and countershaft.

Revitalizant contains constructional material which takes up the wear of details. Due to revitalization on the surface of friction pair a new multifunction gradient covering is formed with the number of necessary character rating and strenuous conditions. The details of the engine increase in volume by returning everything that was worn in the process of exploitation. This is an effect of repairmen. Obtained cover has unique properties: more solid, corrosionproof, low gritness. After revitalization details of engine reliably will serve up to 2-4 times longer. This is an effect of protection from wearing-out.

Due to revitalization of an engine significantly increases and aligns compression in cylinder, reduces fuel consumption, increases adhesion and coasting of car, restores of oil pumps, turbo sites, axles and linings, cylinder bearing surfaces, removes ovality. An engine will work quietly and without any vibration. Due to revitalization it can be kept in a perfect condition.


  • Restores and protects from wearing-out the friction parts of cylinder-piston group, crank type, connecting rod and gas-distributing mechanisms.
  • Reduces fuel consumption up to 30% during idle run.
  • Increases up to nominal oil pressure in system.
  • Smoothes and increases the compression in cylinders.
  • Increases engine power and improves its acceleration capability.
  • Decreases the level of noise and vibration up to 10 times.
  • Decreases noise and vibration level.
  • Increases performance of units up to 2 or 3 times.
  • Protects engine from negative effects after “cold start”.
  • Improves the work of engine after 100 km (51-62 miles).
  • Allows using engine during the emergency leak of oil up to 250 km (186 miles).


1 * 8 ml syringe in a blister.

Buy New XADO Revitalizant EX120 for Diesel Engines (syringe, 8 ml) at XADO online store. You can see lowest price on XADO Revitalizant EX120 for Diesel Engines. This product’s being sale online. Buy XADO tube now, buy XADO online it is safe & fast.

* compared to XADO gel-revitalizant for diesel engines.

box8 ml syringe in blister
syringe8 ml syringe
Reviews (0)
Write a review

* Your Name:

* Your Review:

* Enter the code in the box below:

* Rating:

Bad Good